-
Vendor:Case IHRaven Antenna Patch (Invicta 110 Cruizer Envizio Pro) - 063-0172-101
Regular price $142.43 USDSale price $142.43 USD Regular priceUnit price per$140.14 USD -
Vendor:Case IHRaven Slingshot GPS Patch Antenna - Field Hub - 063-0173-179
Regular price $102.59 USDSale price $102.59 USD Regular priceUnit price per$100.94 USD -
Vendor:Case IHRaven CAN Smartrax 3D Control Node - 063-0173-031
Regular price $9,522.00 USDSale price $9,522.00 USD Regular priceUnit price per$9,365.00 USD -
Vendor:Case IHRaven SCS 660 Spray Console Controller with Master Switch - 063-0172-542
Regular price $2,821.29 USDSale price $2,821.29 USD Regular priceUnit price per$2,776.34 USD -
Up to 14% offVendor:Case IHRaven Granular Dual Product Control Can Node - 063-0172-315
Regular price $2,125.36 USDSale price $2,125.36 USD Regular priceUnit price per$2,480.40 USDSAVE $355.04 -
Vendor:Case IHRaven Speed Sensor 4-Pole Hardware Kit - 063-0159-584
Regular price $1,492.80 USDSale price $1,492.80 USD Regular priceUnit price per$1,483.72 USD -
Up to 14% offVendor:Case IHRaven RGL 600 Lightbar - 063-0172-346
Regular price $1,470.37 USDSale price $1,470.37 USD Regular priceUnit price per$1,716.00 USDSAVE $245.63 -
Vendor:Case IHRaven Single Product Control Node - 063-0173-304
Regular price $1,466.92 USDSale price $1,466.92 USD Regular priceUnit price per$1,443.54 USD -
Up to 29% offVendor:Case IHRaven Ultrasonic Sensor - # 1-063-0130-009
Regular price $1,372.41 USDSale price $1,372.41 USD Regular priceUnit price per$1,930.50 USDSAVE $558.09 -
Up to 27% offVendor:Case IHCase IH - 87265851 - Flow Meter RFM 100 HP DTM (Replaces Raven 063-0172-382 Flow Meter)
Regular price $1,310.40 USDSale price $1,310.40 USD Regular priceUnit price per$1,800.00 USDSAVE $489.60 -
Up to 20% offVendor:Case IHRaven - 063-0173-761 - Flowmeter RFM100P Deutsch DTM-HP
Regular price $1,284.28 USDSale price $1,284.28 USD Regular priceUnit price per$1,608.75 USDSAVE $324.47 -
Vendor:Case IHRaven Motor Assembly Only for NH3 Fast Valve - 063-0172-982
Regular price $1,108.41 USDSale price $1,108.41 USD Regular priceUnit price per$1,090.74 USD -
Vendor:Case IHRaven 30 GPM Hydraulic Fast Valve - 063-0173-164
Regular price $931.18 USDSale price $931.18 USD Regular priceUnit price per$916.30 USD -
Vendor:Case IHRaven 1-1/4" NPT ON/OFF NH3 Valve - 063-0173-203
Regular price $931.18 USDSale price $931.18 USD Regular priceUnit price per$916.30 USD -
Up to 20% offVendor:Case IHRaven Single Liquid Product Control Cable - 115-0171-380
Regular price $941.80 USDSale price $941.80 USD Regular priceUnit price per$1,179.75 USDSAVE $237.95
Frequently Asked Question
A Raven sprayer controller monitors and regulates application rate using information such as vehicle speed and product flow. Depending on the system, the controller can work with flow meters, speed sensors, valves, and boom-control components to maintain the required application rate as operating conditions change.
The Raven SCS 440 and SCS 660 are different spray controller consoles designed for different equipment configurations and control requirements. When replacing a console, check the existing model, wiring, and connected components rather than assuming the two are interchangeable.
A Raven spray controller can work alongside several components, including flow meters, speed sensors, control nodes, valves, ultrasonic sensors, and boom-control equipment. The exact combination depends on the Raven system, application setup, and functions being controlled.
A Raven flow meter measures the volume of liquid moving through the spray system and provides flow information to the controller. The controller can use this information alongside vehicle speed to monitor and adjust application rate.
A Raven control node acts as an interface between the controller and connected spray equipment. Depending on the node, it can communicate over the system network and control functions such as product application, boom sections or other connected equipment.
In many cases, individual components such as flow meters, valves, sensors, cables and control nodes can be replaced separately. The replacement needs to match the existing Raven system, so check the part number, controller model, connections and specifications before ordering.
Start with the Raven part number on the existing component and check it against the replacement product information. You should also compare the controller model, connector type and system configuration, particularly when replacing cables, sensors, valves or control nodes.
A speed sensor provides the controller with ground-speed information used when calculating application rate. Accurate speed information is important because the controller needs to account for changes in travel speed when maintaining the target rate.
Raven valves regulate the flow of liquid through the spray system. Depending on the equipment configuration, valves can be used for functions such as product flow control or individual boom-section control.
Yes, compatible Raven controllers can operate with boom-control components and related sensors to manage spray sections and other boom functions. Compatibility depends on the controller, control node, valve configuration and other components installed on the sprayer.